Thursday, July 25, 2019
Successfulness of the canadian environmental protection act Essay
Successfulness of the canadian environmental protection act - Essay Example On October 23, 1987, the bill passed second reading. After third reading and extensive amendments by House of Commons Legislative Committee, the bill passed as an Act that respects the protection of the environment and human life and health. Introducing the Act was a legislative initiative aimed at invigorating the insipid federal Environmental Assessment and Review Process (EARP).Proposed as a bill by the then Minister of Environment, Tom McMillan, CEPA perceived as federal government of Canadaââ¬â¢s effort to firmly establish that it is federal governmentââ¬â¢s obligation to integrate environmental safety aspects in all of its projects planning and implementation. Therefore, federal government ensured that no policy, program, project, or legislation should proceed without adequate analysis of its potential environmental consequences (UNEP, 1999, p.48). Considering the scope and complexity of changed made after review in 1990s, reviewers decided to repeat the practice in seven years. The objectives for assessment were to review the implementation process, and the extent to which it is proved effective in achieving its prime objective-protecting human health and environment. First Reading Version of 1999 mandated for review in seven years, the final version mandated a reduced time period of five years (Standing Senate Committee on Energy, 2008, p.1). In order to determine CEPAââ¬â¢s success, Environment Canada and health Canada considered four years of implementing CEPA and attributed it as an essential part of the complex regime of inter-related laws, policies, and institutions which guarantee adequate and comprehensive management of threats to human health, life, and environment. This complex regime incorporates federal, provincial, territorial, Aboriginal and local governments, judiciary, industry, and civil society in addition to other national or international organizations (Environment Canada and Health Canada, 2004, p.4). Despite the short time of its implementation and continuous review, in a 2005 web based public response primarily echoed the need of better implementation and enforcement of CEPA, 1999.Several practitioners across Canada and different sectors had a general perception that CEPA, 1999 is primarily a sound piece of legislation which does not require any substantial amendment in its content in order to ensure effective and continuous protection of human health, life, and environment. However, many believed that, generally there is more to be done when it comes to effectively implementing the law in order to ensure that the legislation is tapped to its full potential by taking actions swiftly and reducing risks involved (Versteeg as cited in Standing Senate Committee on Energy, 2008, p.3) According to Standing Senate Committee on Energy(2008,p.3) it is argued that the lacking will to implement and enforce the CEPA, and lacking resources for implementation and enforcement are the major areas of concern that und ermine the effectiveness of CEPA environmental protection regime. It is also argued that resources and time for legislative review of CEPA should not be taken from those allocated for implementation
Wednesday, July 24, 2019
Response paper on Film 12 Monkeys Essay Example | Topics and Well Written Essays - 500 words
Response paper on Film 12 Monkeys - Essay Example The few survivors are left to live in tunnels underground. The earth is inhabited only by animals and insects which fearlessly wander the planet which is now free of humans. The virus which succeeded in wiping out such a big portion of mankind, apparently, didnââ¬â¢t have any effect on any other forms of life on earth. The main character, a prisoner called James Cole, is about to be sent back in time, to the year of 1996, to get a pure specimen of the virus to make it possible for the scientists of his present, to study the virus and discover a way of reversing the damages caused by it and eradicating it, to make the earth suitable for humans to live in. In the first attempt to travel back to 1996, Cole accidentally ends up in the year of 1990. He gets imprisoned and sent to a mental asylum when he tries to convince those around him that he has come from the future. There he is taken over by psychiatrist, Dr. Kathryn Railly. The people who belong to the present of 1996 are convinced that this man who claims to have come from the future, who believes that a certain virus is going to kill 5 billion people in 1996, is indeed insane. Apart from Dr. Railly nobody is even willing to hear him out. Even though Dr. Railly feels a strange and unexplainable attraction towards Cole, even she is convinced that he is just delusional and whatever he believes to be his reality is just a ââ¬Ëmeticulously constructed fantasyââ¬â¢ of his mind. Cole keeps having recurring dreams of a man being shot dead at an airport and that of a woman running towards the dying man. He sees it through the eyes of a child who is present at the place where the incident takes place. This dream is the link that connects the central theme of the past, the present and the future. The childââ¬â¢s striking resemblance to Cole makes sense only towards the end of the movie. Another inmate of the asylum, Jeffrey Goines, son of a renowned virologist, provides
Should the U.S. lower the drinking age to 18 Research Paper
Should the U.S. lower the drinking age to 18 - Research Paper Example In the 1970s , the drinking age was reduced to 18 , as this was followed by many of the states so that the individuals be given the right under the Twenty Sixth Amendment passage. There are some states which give the permission to the 18 year olds to be present in the places where alcohol beverages are consumed , even if they are not consuming the beverages themselves and sometimes even give them the permission to work as bar tenders , serving the beverages. Whereas there are some states which give the permission to the 21 year olds to consume the alcohol beverages on the private property with the permission or the supervision of a family member. (Williams, Elizabeth M, and Stephanie J. Carter. The A-Z Encyclopedia of Food Controversies and the Law. Santa Barbara, Calif: Greenwood/ABC-CLIO, 2011.) Despite the specific changes made by the federal law there are about thirty states within the United States which give the permission to the individuals of the 21 years age or over to consu me the alcohol under the supervision of a family member or with the consent of their parents. ... lif: Greenwood/ABC-CLIO, 2011.) There have been many arguments and the debates that the minimum age of drinking should be reduced so that so that the individuals have the responsibility and staring at an early age will broaden their horizon to the responsible drinking. Amethyst Initiative , which are one of the groups of college educators, have agreed and given the advocacy of the underage drinking. National Institute of Alcohol Abuse and Alcoholism College Drinking Task Force, and Mothers Against Drunk Driving , on the other hand have urged and they advocate rigorously against the reduction of the underage drinking so that the fatal consequences such as the alcohol related traffic incidents , alcohol related traffic deaths and alcohol related sexual assaults can be reduced and it can only be done with the help of the minimum drinking age laws enforcements on the campuses and the schools. For the policy makers in the United States, the underage drinking has been a well debated issue in the country and there have been various laws introduced and changed over the past many years as well. Due to the increase in the drunk driving fatalities , the United States government increased the drinking age from 18 years to 21 years so that the fatality rate could be decreased. There have been arguments put forth which question that what reasons have resulted in the underage drinking to be reduced to 18. There are some critics who criticize the current drinking age which differentiates and arbitrarily discriminates between the individuals who are 21 years old and the individuals who are 18 years old. In the country like United States, the individual who is 18 years old is regarded as the legally adult, and hence has the freedom to join military , have the capability and ability to
Tuesday, July 23, 2019
Questions Essay Example | Topics and Well Written Essays - 1000 words - 5
Questions - Essay Example He was interested by the fact that the species were different. He concluded that the species were different because they dwelled in different environments The concept of natural selection explains how species evolves and genes are passed from generation to the next. Darwin argues that a species can develop a functional advantage in that the species grows wing and learn to fly. He asserts that the offspring will inherit that advantage and pass it on to the offsprings. On the other hand, those who are disadvantaged but members of the same species will gradually die and live the superior members of the same species. Species preserve the functional advantage and that help the species to compete in the harsh environment. Darwinââ¬â¢s explanation of the origin of species in 1859 was criticized by Christians because they believed in Godââ¬â¢s creation for six days. The natural selection was received with hostility because his ideas were not with alignment with biblical descriptions on how Adam and Eve were created. In addition, after the arrival of Darwinââ¬â¢s theory, scientists conflicted and they did not support the idea of evolution. A vector is a vehicle that transfers genetic materials to a target cell. The significance of vectors is to pass on the genes to the intended cell. For evolution to take place there has to be passage of genetic materials from one species to the other. Hence the vector facilitates the movement of biological traits from one generation to the other. Equilibrium is a principle that explains that genes remain the same from one generation to the other without any disturbing factor. If the situation remains constant then there will be evolution stability. However this can be affected by forces such as mutations, natural selection, non random mating, genetic drift and gene flow. Isolation can promote genetic divergence through mechanisms such as mutation, genetic drift and natural selection. Allopathic speciation is a
Monday, July 22, 2019
Truman Doctrines Essay Example for Free
Truman Doctrines Essay During the Cold War, most U. S. presidents came up with policies also known as ââ¬Å"doctrinesâ⬠to help remember who stood for what. In this report I will be summarizing a situation that required U. S. diplomatic efforts during President Harry Truman time; explicate the diplomatic doctrine the president followed; describing the effects of this diplomatic efforts for the U. S. and other countries; assess the advantages and disadvantages of the particular doctrine that followed. In February 1947, the British government informed the United States that it could no longer furnish the economic and military assistance it had been providing to Greece and Turkey since the end of WWII. The Truman administration believed that both nations were threatened by communism and it jumped at the chance to take a tough stand against the Soviet Union. In Greece, force has been battling the Greek royal government since the end of WWII. In Turkey, the Soviets were demanding some manner of control over the Dardanelles, territory from which Turkey was able to dominate the strategies waterways from the Black Sea to the Mediterranean. On March 12, 1947 Truman appear before a group of Congress to make his case. He declared the world faced a chance in the years to come. Nations could adapt a way of life ââ¬Å"based upon the will of the majorityâ⬠and minority forcibly imposed upon the majority. â⬠He proposed the Truman Doctrine which provided political, military, and economic assistance to all democratic nations under threat from external or internal authoritarian forces. It effectively reoriented U. S. foreign policy, away from its usual standpoint of withdrawal from regional conflicts not directly involving the U.à S. , to one of possible intervention in far away conflicts. He began by outlining the situation in Greece and Turkey, ââ¬Å"Assistance is imperative if Greece is to survive as a free nation, they must have assistance if it is to become a self-sufficient and self-respecting democracy. â⬠Greece and Turkey will fall to communism without help. Truman requested that Congress provide $400 million worth of aid to both Greece and Turkey to support the dispatch of American civilian and military personnel and equipment to the region. Congress granted it. This became known as the Military Assistance Program. It ultimately led to NATO. Many historians say the Truman Doctrine marked the American policy of ââ¬Å"containment. â⬠The most famous passage from Trumanââ¬â¢s speech: ââ¬Å"I believe that it must be the policy of the U. S. to support free peoples who are resisting attempted subjugation by armed minorities or by outside pressure. â⬠They ideas of this speech informed the communism that they can keep what it had got but Truman would not let it grow anymore. Houghton Mifflin says ââ¬Å"that Truman Doctrine expanded the nationââ¬â¢s role in checking the spread of communism. â⬠This interpretation basically presumes that the U. S. was in the right. As a result of Trumanââ¬â¢s presentation of the global threat of Communism led to an anti-Communist Hysteria which was to end in the ââ¬Å"Red Scareâ⬠of the 1950s. It also convinced the Soviets in Russia that Americas was a threat to Soviets Communism, and it substantially provoked the Cold War for the 30 years.
Sunday, July 21, 2019
Is Othello a Victim or Villain?
Is Othello a Victim or Villain? This is a play about Othello, a Moorish general in the Venetian army. He is the ultimate villain in this play as opposed to Iago, the high ranking soldier. Most would agree as a matter of fact that Iago is undoubtedly the villain of this tragic story. In order to perceive this, a superficial assessment of the two main characters in the play; Othello and Iago, should be made. The art of analysis on its own rejects the simple easy explanations but rather deals in the complex and mystifying facts. Although Iago is the natural nuisance and thus the obvious bad guy, his destiny is to create the tragedy that this play later becomes. A lengthy consideration in addition to an open mind will show the truth of the matter. Othello is the actual villain. Even though he initially lacks any malicious thoughts and ideas, he eventually gets to become a murderer due to emotionally untrustworthy and jealousy. As you read the play it is not common to associate Othello with such descriptive words as conceited, though he is in every sense of the word. As the plot unfolds it is already clear that Othello is going to fall from grace in a huge way and his undoing will be his insatiable ego. He knows his abilities as a great warrior and his superb sword wielding abilities. His prowess on the battle field raised his ranks to the brim of the military defenses of Venice city. He gained his lofty status due to his expertise as a military officer and with that came his conceit. When Iago tells him of the threats from Brabantio, he says, Let him do his spite: My services which I have done the signiory shall out-tongue his complaints (1509). He walks with an air of over confidence depicting tones of arrogance in saying that no one has the authority to accuse is reputation. And to add on to that he shows his lofty opinion, as lofty as it can be, by saying, I fetch my life and being from men of royal siege (1509). His head is swelling with the status and importance given to him by the men of power in the city of Venice. He starts to think he is infallible, great and unfaultable, thus weakening him to the crucial insights of his enemies as to what they should do to discredit Othello from grace, the Moor already changes with my poison: dangerous conceits are in their natures poisons (1555). Whilst Iago reveals his detailed plot, we come to discover another vice possessed by Othello, he has a jealous mind. This comes as a result of insecurities of his colour, his education and his age. I am black and have not those soft parts of conversation that clamberers have, for I am declined into the vale of years (1553). Othellos jealousy is fed by the aforementioned insecurities. He says, As he (Cassio) shall smile, Othello shall go mad; and his unbookish jealousy must construe poor Cassios smiles, gestures, and light behavior quite in the wrong (1569). Iago therefore only has to create an opportunity for Othellos jealousy to initiate his downfall. Finally, we take note of his emotional dishonesty. As soon as Iago plants his thoughts, Othellos head and heart quickly fills up with contempt and bitterness. He openly confesses his love for Desdemona but he is easily convinced otherwise by Iago due to his dishonest nature meaning he was not being truthful about his love for Desdemona. He says, If she be false, O then Heavn mocks itself: Ill not believe it (1554), This makes him sound like a passionate man yet afterwards gets mad and discredits Emilia as a simple bawd. (1557) since she says the Desdemona is faithful to him. This illustrates his love being no more that a sad illusion, simply an obsession to say the least. His emotional untruthfulness is connected to all his other vices and feeds of them creating a dangerous monster out on a once adorable and admirable man. However as much as Othello is the villain of the story, at more than one instance he has appeared to look like the victim as well. He appears to be a victim of his society and seems as though Iago toys with his irritable nature at his pleasure. Othello seems to be very gullible and at times very distant from the truth. He is innocent to the working mayhems and mischievous plans Iago comes up with. Othello loses his tempers easily as a child does when frustrated and Iago knew how to play with his shaky ego that amounted due to the thought that his wife is heating on him. And of course that is blatant lie. All the grace and gentleness that was Desdemona was easily mistaken for flirtations to the unsuspecting Othello. His uncontrollable temper and the proof caused the untimely death of his ever faithful wife. His reaction was like that of a child whose favorite toy had been snatched away. His anger does not even give him the time to listen to her side of the story and refuses to listen to her pleas of innocence. Though he has an evil side to him, Othello had turned into an insane state of mind and one could actually state that he might not have realized what he was doing until it was a little bit too late. While Othello might have some virtuous attributes, there is no doubt that his emotional dishonesty, jealousy and conceit all sum up to make him the ultimate villain of this Shakespearian classic play. In the end it is the unwitting prophecy Iago makes that comes true, O, beware, my lord, of jealousy; It is the green-eyed monster which doth mock the meat it feeds on; that cuckold lives in bliss Who, certain of his fate, loves not his wronger; But, O, what damned minutes tells he oer Who dotes, yet doubts, suspects, yet strongly loves!(1550). Yes, Iago should be the villain, but we hugely expect this of him, and he therefore lives up to just what we would expect.. The true bad guy, who gives this play its twist is Othello the disingenuous, suspicious and the proud Moor of Venice. Isolation of Elements: General Principles and Processes Isolation of Elements: General Principles and Processes Introduction to Metallurgy Our planet earth is a vast source of elements which are distributed in its crust, water bodies and atmosphere. Out of these elements nearly 80 per cent are metals which occur either in the combined state or in free state (called motive state). Metals occurring in free state are copper, silver, gold and platinum group metals. Not only metals some non-metals also occur in the free state, such as, carbon, sulphur, nitrogen, oxygen and group 18 elements (the noble gases). Apart from metals and non-metals some elements occur as metalloids which show both the properties of metals and non-metals. Metalloid silicon is the backbone of electronic industry and solar cells. Distribution of elements in the above three categories in shown in the periodic Table (Fig. 6.1, Ref www.wikipedia.org) Fig. 6.1 Some most abundant elements in the combined form as solutes are: In earth crust In sea water O, Si, Al, Fe, Cl-, Na+, SO42- Ca, Na, K and Mg MG2+, Ca2+ and K+ Some life supporting metals are iron, calcium and magnesium. Chlorophyll, a compound of magnesium, is responsible for the photosynthesis process in releasing oxygen. General principles of metallurgy For any application of a metal it has to be produced in a pure state. Here lies the importance or metallurgy. Metallurgy involves the initial purification and concentration of the ore and its subsequent reduction to metal. Minerals and ores Naturally occurring sources of metals are called minerals which are generally contaminated with impurities such as days and siliceous matter. A mineral which is rich in the metal compound and which can be used to extract metal economically is termed as an ore. Thus, all ores are minerals but all minerals are not ores. The impurities which are generally present in ores are called gangue. Following is the list of some important ores of a few metals: Metal Ore Chemical composition Iron (Fe) Photograph of metals Iron pyrites Hematite Magnetite FeS2 Fe2O3 Fe3O4 Aluminium (Al) Photograph of metals Bauxite Cryolite Al2O3 . 2H2O Na3 Al F6 Copper (Cu) Photograph of metals Copper pyrites Cuprite Malachite (Green) Cu Fe S2 Cu2O CuCO3 . Cu(OH)2 Photograph of metals Zinc (Zn) Calamine Zinc blende Zincite ZnCO3 ZnS ZnO From the above list of ores and also from literature (www.wikipedia.org) You will find that metals generally occur as: Oxides Sulphides Carbonates Halides Silicates Steps in the extraction of metals Concentration of ore Reduction of ore (Chemical reduction or electrochemical reduction) Refining of metal Concentration of ore Ores are usually contaminated with sand and clay minerals called gangue. Therefore, the first step to obtain the metal from the ore is to remove as much gangue as possible. To do so the ore is crushed to fine particles and subjected to the following methods of concentration: Hydraulic washing Magnetic Separation Froth flotation method Hydraulic washing Hydraulic washing is done with an upward flow of water. In this process lighter gangue particles are washed away leaving behind the desired heavy are particles. Magnetic separation This method is based on the different magnetic behavior of gangue particles and the ore. The conclutration of ore is done by putting the dried crushed ore on a conveyor belt moving around a powerful magnetic roller. In this way the ore is separated from the gangue particles. As an example, magnetite is ferromagnetic and on (Fe3O4). Passing over a magnetic roller it gets carried away and made free from non-magnetic gangue. Froth Flotation This method is designed for the concentration of sulphide ores. The method is based on the relative density of gangue particles and ore particles. Either of two can be made to float on the aqueous surface with air bubbles and be collected. This is achieved by adding some chemical compounds in water. The arrangement is shown is Fig. 6. Air is blown with pressure to create froth which engulphes either the gangue or ore particles. Following compounds: Frothers: Synthetic detergents, pine, oil, eucalyptus oil or coal tar. Collectors: X anthates . These impart water repellent properties to the surface of the ore particles to be floated. Froth Stabilisers: Cresols and aniline. Depressants: Sodium cyanide. The purpose of a depressant is to make ineffective one component of the mixed ore. For example, from a mixture of ZnS (sphalerite) and PbS (galena) ZnS is NaCNwhile heavier PbS particles float on the surface. Leaching Leaching is extration of an active ingradient of the low grade ore. This is done by dissolving the desired component in a suitable chemical solution.[ Example Are: Leaching of low grade carbonate and oxide ores of copper by dilute sulphuric acid: CuCO3(S) + H2SO4(aq) ââ â CuSO4(aq) + CO2(g) + H2O(l) CuO(S) + H2SO4(aq) ââ â CuSO4(aq) + H2O(l) Leaching of amphoteric arebauxide (Al2O3) with hot aqueous sodium hydroxide when impurities such as Fe2O3 and silicates remain Al2O3(S) + 2NaOH(aq) + 3H2O(l) 2Na[Al(OH)4] aq Na [Al (OH)4] is converted to pure Al2O3 by passing CO2 gas and heating the product Al(OH)3: Na[Al(OH)4](aq)+CO2(g) ââ â Al(OH)3(S) + NaHCO3(aq) Al(OH)3(S) Al2O3(S) + 3H2O(g) Leaching of gold and silver with aqueous sodium cyanide solution in the presence of air: 4 Au(S) + 8NaCN(aq) + O2(g) + 2H2O(l) ââ â 4Na[Au(CN)2](aq) + 4NaOH(aq) Ag(S) + 8NaCH(aq) + O2(g) + 2H2O(l) ââ â 4Na[AgKN)2](aq) + 4NaOH(aq) The respective metals can be obtained by adding zinc which is a more electropositive metal than either gold or silver: 2Na [Au(CN)2](aq) + Zn(S) ââ â Na2 [Zn(CN)4](aq) + 2 Au (S) Conversion of ore to oxide Metals used in huge amounts generally occur as sulphides, oxides or carbonates. For sulphide and carbonate ores it is necessary to convert them into oxide forms prior to their reduction to metals. This conversion is necessary due to the following reason: Availability of a less costly reducing agent The reducing agent should not interact chemically with the metal produced. Availability of a suitable furnace. The production of metal should be cost effective. Fewer impurities There is hardly a reducing agent which meets all the above requirements. Electropositive metals such as magnesium, calcium and aluminium can be used for the chemical reduction of oxide ores. These metals can not be used for the large scale production of less electropositive metals because of their high cost. However, carbon as coke fits well as a reducing agent within the above listed parameters. Its oxide, carbon monoxide is also a very good reducing agent. The efficacy of carbon monoxide as a reducing agent increases with the increase in temperature. One serious drawback of coke is that it reacts with many transition metals and some non-transition metals at higher temperatures to form carbides. However, carbon as coke and carbon monoxide remain the two versatile reducing agents for iron ores. For carbon to be used as a reducing agent the sulphide or carbonate ores have to be converted into their respective oxide forms. Carbon does not reduce sulphide ores to give metals. To find out the reason consider the following two reduction reactions: 2MS (S) + C(S) 2M (l or S) + CS2(g) â⬠¦Ã¢â¬ ¦Ã¢â¬ ¦.(i) (sulphide form) MO (S) + C (S) M (l or S) + CO (g) â⬠¦Ã¢â¬ ¦Ã¢â¬ ¦ (ii) (Oxide form) For these two reduction reactions by carbon the Gibbs energy of the reaction should be negative. This can happen only when à ¢Ãâ â⬠G for CS2 will be more negative than à ¢Ãâ â⬠G for MS (first reaction); and for the second reaction à ¢Ãâ â⬠G for CO should be more negative than à ¢Ãâ â⬠G for MO. Thermodynamically the first reaction where CS2 is formed is not feasible, but the record reaction is feasible. It may be noted that CS2 is very much less stable than CO gas. Therefore, the sulphide ores are first converted into the oxide form before reducing them with coke. This is done by heating the sulphide ores in the presence of roasting the sulphide ors is that a by-product sulphur dioxide (SO2) is obtained which is used to manufacture sulphuric acid. To get the ores into their respective oxide forms following processes are used: Calcination Calcination is heating the ores in the absence of air. This method is used for the carbonate, hydroxide and hydrated ores CaCO3(S) CaO(S) + CO2(g) (calcite) MgCO3. CaCO3(S) MgO(S) + CaO(S) + 2CO2(g) (Dolomite) CuCO3. Cu(OH)2(S) 2CuO(S) + CO2(g) + H2O(g) (Malachite) Calcination is generally done is a reverberatory furnace (Fig. 6. Ref www.wikipedia.org). This process makes the ore process and easily workable. Roasting Roasting is heating the ores in the presence of air. This is done mainly for sulphide ores: 2 Fe S2 (S) + 5O2(g) ââ â 2FeO(S) + 2SO2(g) (iron pyrite) 2Cu2S(S) + 3O2(g) ââ â 2Cu2O(S) + 2SO2(g) (copper glance) 2ZuS(S) + 3O2(g) ââ â 2PbO(S) + 2SO2(g) (Galena) Roasting is done in reverberatory furnace (Fig. 6.4 Fef. www.wikipedia.org) Roasting also removes volatile impurities like sulphur, arsenic and phosphorus as their volatile oxides: S(S) + O2 (g) ââ â SO2(g) 4AS(S) + 3O2(g) ââ â 2AS2O3(g) P4(S) + 5O2(g) ââ â P4O10(g) Student Activity 1 Metals used in an ordinary filament bulb Draw the figure or an ordinary bulb Label various metals used in it Give reason as to why tungsten metal is used as the filament Student Worksheets Student Worksheet 1 Which metal is liquid at room temperature Aluminium Lead Mercury Zinc Leaching is generally used for the following ores of metals Lead Copper Iron Aluminium In Aluminium-thermite process the reducing agent used is Carbon Hydrogen Aluminium Sodium Heating of ores in the absence of air is known as Roasting Calcination Leaching Bensemerization Froth flotation process is used to concentrate the following ore Halide Silicates Sulphide carbonate how do metals occur in nature by virtue of their reactivity giving chemical equations describe the process of calcinations and roasting, respectively. Why are sulphide ores roasted to their oxide forms before their reduction with coke? Describe the principle of leaching with suitable examples. Describe the principle of froth flotation process. How is PbS ore concentration ewhen it is contaminated with ZnS? SUMMARY S. No. Description Ore A mineral with high concentration of metal compound which is used to extract metal profitably. Occurrence of metals in nature Oxides Sulphides Carbonates Silicates Gangue Undesired materials present in ore. Metallurgy Process of isolation of metals from ores involving the steps: Concentration of ore Reduction of ore to metal Purification of metal Concentration of ore Magnetic Froth floatation (for sulphide ores) Leaching Leaching Extraction with a suitable solvent for low grade ores. Calcinations Heating of ores (carbonate or hydroxide) in the absence of air. Roasting Heating of ores (sulphide ores) in the presence of air. Smelting Industrial reduction process to obtain metal from ore. Reducing agents used in smelting Hydrogen Carbon as coke Aluminium (In Alumino-thermite process Air Electrolytic Refining of crude metal Liquation Cupellation Besemerization (known as oxidative refining) Vapour phase (van Arkel and de Boer, and Mond processes). Zone refining (for silicon) Hydrometallurgy Electrolytic Ellingham diagrams Curves of Gibbs energy vs temperature. Used to select a suitable reducing agent. LOW CHART 1. 2. Classification of ores on the basis of the metal compounds Concentration of ores on the basis of their chemical nature 3. 4. Reduction of ore to get the metal choosing a suitable reducing agent Purification of crude metal based on the nature of impurities present Crossword A mineral having high concentration of a metal compound. ORE Heating or ore in the absence of air. CALCINATIONS Heating of ore in the presence of air. ROASTING Valuable by-product during roasting. SO2 gas Extraction of low grade ores. LEACHING Concentration of ore by proving air bubbles. FROTH FLOTATION A furnace used for the smelting of iron ore. BLAST FURNACE Process of reduction of metal oxides by aluminium. ALUMINO-THERMITE PROCESS Process used to obtain very high pure silicon. ZONE REFINING Carbon monoxide is used to purify nickel. MONDS PROCESS Zirconium tetraiodide (Zrl4) vapours are decomposed on heated tungsten filament. ARKEL-DE BOER PROCSS Sodium is obtained by passing electric current in molten sodium chloride. ELECTROLYTIC REDUCTION ADDITIONAL RESOURCE LINKS www.wikipedia.org Reduction of ore to crude metal By using the process of reduction, roasted or calcined ores are converted to crude metal. Different reducing agents are used depending upon the reaction between the metal oxide and the reducing agent. Reduction with carbon : FeZO3, CuO, ZuO, SuO2, PbO etc. Reduction with Aluminium : FeZO3, Cr2O3, Mn3O4, TiO2 etc. Reduction with Magnesium : B2O3, TiCl4, etc Reduction with hydrogen : WO3, MOO3, GeO2, CO3O4 etc Reduction with CO : Fe2O4, FeZO3, PbO, CuO Electrolytic reduction : Electrolyzing of oxides, hydroxides or chlorides in fused state. Smelting : This is a process in which oxide of a metal is mixed with coke and a suitable flux. The mixture is heated to a high temperature in a blast furnace. Iron, Copper, Zinc and tin can be obtained by this process. Carbon is a good reducing agent below 983K where as above this temperature CO acts as reducing agent. ZnO(S) + C(S) Zn(S) + CO(g) Zincite + 2C(S) Sn(S) + 2CO(g) Cassitesite Pondered anthracite Fe2 + 3C(S) 2Fe(S) + 3CO(g) Haemetite CuO(S) + C(S) Cu(S) + CO(g) A flux is a substance which is added to roated or calcined ore during smelting to remove the non-fusible impurities of metallic oxides, silica, and silicates etc. During smelting flux combines with the non-fusible impurity to convert it into fusible material called slag. The slag being light float over the molten metal from where it is removed. Flux is of two types: Acidic flux SiO2 : Basic flux Lime stone (CaCO3) and Magnetite (MgCO3) SiO2 + MgCO3 MgSio3 + SiO2 + CaCO3 CaSiO3 + Hydrometallurgy : Copper, Silver and gold are extracted by this process. The process is based on the principle that more electropositive metal can displace less electro positive metal from its salt solution. The one is treated with such seagents that the metal forms a soluble compound. On adding more electropositive metal to the solution, the less electropositive metal present in the solution is precipitated. Example: Extraction of Copper : Malachite ore is roasted and oxide formed is dissolved in sulphuric acid. On adding scrap iron to the solution, copper is precipitated. Cu(OH)2 . CuC ââ â 2CuO(S) + H2O(P) + C CuO(S) + H2S ââ â CuS + CuS + Fe(S) ââ â Cu(S) + FeS Extraction of silver : ore is dissolved in NaCN solution and air is blown followed by addition of Zinc turnings. Silver is precipitated. Ag2S + 4NaCN ââ â 2Na[Ag(CN)2] + Na2S 2Na [Ag(CN)2] + Zn ââ â Na2 [Zn(CN)4] + 2Ag Solution Acid flux used to remove basic impurities Basic flux used to remove acidic impurities Reduction with hydrogen :Some of he metal oxides (mostly transition metals) can react with carbon at high temperatures to give metal carbides which resist further oxidation. Oxides of these metal, are better reduced by hydrogen gas. i.e. WO3 + 3H2 W + 3H2O(g) MOO3 + 3H2 Mo + 3H2O(g) GeO2 + 2H2 Ge + 2H2O(g) CO3O4 + 4H2 3Co + 2H2O(g) Using H2(G), metals are obtained in small scale as hydrogen is highly explosive. Aluminium reduction method: This method is also called Alumino-thermite process. Some of the metal oxides cannot be reduced by carbon as affinity of oxygen for the metal is more than for carbon, also, metal may form carbide at high temperature. Such metallic oxides are reduced by using aluminium powder. The reaction is initiated by the using barium per oxide and a small piece of Mg ribbon. Fig. Cr2 + 2Al(S) 2Cr(P) + Al2 Fe2 + 2Al(S) 2Fe(P) + Al2 3Mn3 + 8Al(s) 9Mn(P) +4Al2 Function of BaO2 is to provide oxygen to magnesium when lot of heat is volved which initiates the thermite process. Air reduction : Sulphide ores of less electro positive metals such as Hg, Pb and Cu etc are heated in air to partially convert the ore into oxide which then reacts with the remaining sulphide in absence of air to give the metal and SO2 gas. 2HgS(S) +3 2HgO + 2S 2HgO(S) +HgS(S) 3Hg + S Reaction on p-5 This process may also be called ante reduction process. 2PbS + 3O2 2PbO + 2S 2Pbu + PbS 3Pb + S 2Cu2S + 3O2 2Cu20 + 2S 2Cu20 + Cu2S 6Cu + S Reduction by Electrolysis : The oxides of highly electropositive metals of group I, II and Al element of group etc cannot temperatures and these can form carbides. These metals are obtained by electrolysis of their oxides, hydroxides or chlorides in fused state. To lower the fusion temperatures or to increase the conductivity or both a small amount of other salt is added. The metal is liberated at cathode. Sodium metal is obtained by electrolysis of fused mixture of Nacl and Cacl2 (downs process) or by electrolysis of fused sodium hydroxide (Costners process). Nacl ââ â Na+ + cl- Fused At anode cl- ââ â Cl + e- Cl + cl ââ â c At Cathode Na+ + e- ââ â Na(l) Aluminium metal is obtained by electrolysis of fused mixture of alumina and Gyolite (Na3[Al F6]) Na3 Al ââ â 3Na F(P) + Al Al ââ âAl3+ + 3F- At anode F- ââ â F + e- F+F ââ â F2(a) 2A+ 6 ââ â 4Al + 3O2(g) At cathode Al3+ + 3e- ââ â A(l) Anode gets cosseted by oxygen liberated during electrolysis, which needs replacement from time to time. Refining of metals: Metals obtained by any of the reduction method except electrolytic reduction contains impurities. Refining of metals is process where by undesired impurities present in the metals are removed. Different refining processes may be applied depending upon the nature of the metal and nature of impurities. Name of the Process Metal to be refined Liquation Low melting metals like Sn, Pb, Bi and Hq etc. Cupellation Silver containing lead. (Impure silver containing lead is heated in cupel made of bone ash or cement and a blast of air is passed over the molten mass. The impurities are oxidized and removed with the blast of air) Bessemerisation Fe and Cu Vapour phase refining There are two methods Monds process Impure Ni is heated with CO(g)at 323K when volatile Ni (CO)4is formed. These vapours of Ni(VO)4are passed into another chamber maintained at 306K when Ni (CO)4decomposes to pure Ni which gets deposited on small Ni balls kept in the chamber and carbon-monoxide gas is rejected. Ni(S)+4CO(g)Ni(CO)4Ni(S)+ 4CO(g) Van Arkel Process Ti, Zr, Hf, V, Th, B are refined by this method. Impure metal is heated with I2, producing volatile T1I4,, ZrI4or BI3. These vapours are passed over electrically heated filament of Tungsten. The vapours decompose, metal gets deposited over the filament and iodine liberated is . Ti(S)+ 2TiTi(s) + 2 Zr(S)+ 2ZnZr(s) + 2 2B(S)+ 32Bââ â 2B(s) + 3 Zone refining Highly pure silicon or gernanium required for making semi-conductors are refined by this method. The impure rod of silicon or germanium is surrounded by a heating cir-l which can move from one end to another. The heater is allowed to move in one particular direction. As the heater moves away, the metal capitalizes and impurities move along the direction of the movement of the heater. The process is repeated a number of times when a small portion of the rod gets purified. The end portion of the rod having high concentration of impurities can be cut and disconded. Electrolytic refining Most of the metals like copper, silver, gold, aluminium, lead etc are refined by this process. The impure metal is made the anode and a thin sheet of pure metal is made a cathode. The electrolytic solution consists generally of an aqueous solution of a salt containing some acid or a complex of the metal. Purification of Copper Anode Impure copper Cathode Thin sheets of pure copper Electrolyte An aqueous solution of copper sulphate containing some H2SO4. Purification of Silver Anode: Impure silver Cathode: Thin sheet of pure Ag Electrolyte An aqueous solution of ASNO3containing HNO3. Pb Anode: Impure metal Cathode: Sheet of pure lead Electrolyte A solution of PbS1F6containing 8-10 of H2S1F6. Purification of Sn Anode: Impure Tin Cathode: A sheet of pure tin metal Electrolyte An aqueous solution of SNSO4containing H2S1F6. Thermodynamics of Metallurgical process: The metals are extracted when their oxides are heated with carbon or other metal and by thermal decomposition. For any spontaneous reaction, the Gibbs anergy change à ¢Ãâ â⬠G must be negative at a particular temperature. à ¢Ãâ â⬠G = à ¢Ãâ â⬠H Tà ¢Ãâ â⬠S à ¢Ãâ â⬠H is enthal by change during the reaction, T is the absolute temperature and change during the reaction, T is the absolute temperature and à ¢Ãâ â⬠S is the entropy change during the reaction. The reaction will processed only when à ¢Ãâ â⬠G is negative. For reaction where à ¢Ãâ â⬠H is negative and à ¢Ãâ â⬠S is positive. The reaction proceeds even at low temperatures. Theoretically, it is possible to decompose all metal oxides if sufficiently high temperature is attainable but oxides of Ag, An and Hg are the only oxides which can be decomposed at easily attainable temperatures. Hence these metals are obtained by thermal decomposition of their oxides. The choice of reducing agent to obtain the metal from its oxide depends upon the change in Gibbs energy à ¢Ãâ â⬠G. The plot of Gibbs energy change versus temperature is called. Ellingham disgram: There diagrams can be drawn for different compounds such as oxides, sulphides, halides etc. using these diagrams one can make a choice of reducing agent and the corresponding temperature at which, the reaction becomes feasible. à ¢Ãâ â⬠G for the reaction is -ve. Some salient features of Ellingham diagram are: The slope for metal to metal oxide is upward as Gibbs energy change decreases with increase of temperature. The all follow a straight line unless they melt or vaporize. When change in entropy is large, the slope of line also changes for example the Hg-HgO line changes slope at 629K when mercury brills and similarly Mg-MgO changes slope at 1393K. When temperature is increased, the graph crossed the line à ¢Ãâ â⬠G=0 at a particular temperature. Below this temperature, à ¢Ãâ â⬠G being negative, oxide is stable where as above this temperature à ¢Ãâ â⬠G is positive and the oxide become unstable. Thus it should decompose into metal and oxygen. In a number of reduction processes, one metal is used to reduce the oxide of the other metal. Any metal can reduce the oxide or the another metal which lie above it in Ellingham diagram. Ellingham diagrams give an indication whether the reaction is possible or not. These graphs do not predict the kinetics of the reaction. This is a major limitation of Ellingham diagrams. Ellingham diagram of carbon: Carbon reacts with oxygen to give two oxides C(S) + O2(g) ââ â CO2(g) 2C(S) + O2(g) ââ â 2CO(g) Carbon monoxide can further react with oxygen to give carbon dioxide. 2CO(g) + O2(g) ââ â 2CO2(g) When carbon changes to carbon dioxide, change in entropy (à ¢Ãâ â⬠S) is very small and à ¢Ãâ â⬠G hardly shows changes with increasing temperature. The graph of à ¢Ãâ â⬠G against T is almost horizontal. When carbon changes to carbon monoxide, à ¢Ãâ â⬠S is positive and à ¢Ãâ â⬠G becomes more negative with increasing temperature. As a result, the line shows downward slope. The two lines for carbon to carbon-dioxide and carbon to carbon monoxide cross at 983K. below this temperature formation of CO2 is favoured whereas above this temperatures formation of CO is preferred. Ellingham diagram of metal sulphide : Some metals occur in nature as sulphides, such as ZnS, CuS and PbS. The reaction for the reduction of these sulphides with carbon is highly 2MS(S) + C(S) ââ â 2M(S) + CS2(g) unfavourable energetically because of the instability of carbon disulphide. It being an endothermic reaction, sulphide ores are roasted to oxides and their reduced into metals.
Saturday, July 20, 2019
Tajikistan labour migration and its implications
Tajikistan labour migration and its implications Introduction Background Labour migration and remittances are one of the most evident globalisation phenomena in Tajikistan. According to UNDP Human Development Report (2005) and World Bank (2008) from 600,000 to 1,500,000 Tajik citizens migrated overseas for work in 2005 and remittances being sent by them constitute staggering 36% of national GDP of Tajikistan. Remittances are proven to be large source of external finance stimulating consumption which in turn has a very positive effect on economy, especially on services sector. According to World Bank (2005) remittances are considered as the second biggest source of development finance after foreign direct investment. While remittances serve as an important social stabilising factor, they can also act as means of internal investment and boosting in this manner local development. My analysis will focus on the role of remittance savings either in leveraging to borrow from banking systems to invest in activities such as small businesses, or in directly financing them, which as the result improve the economic welfare of migrant households in both rural and urban areas. This dissertation will be based on analysis of data sources coming from various researches conducted by international organisations and research centres about Tajikistan labour migration and its implications. I will also examine the dynamic strategic aspects of interaction between the migrant and the remittance-receiving relatives and asses the benefits of particular types of motives under remitting. Furthermore, I would like to model hypothetical usage of savings out of remittances to business opportunities and asses the implications. The Republic of Tajikistan Tajikistan is the smallest country in the Central Asia and situated in south-east part of that region. 93% of Tajikistan consists of mountains, and more than half of the country lies on an altitude higher than 3000 meters above sea level. This leaves the countrys population of approximately 7 million people to reside and produce mainly in the remaining 6.52% of arable land, struggling with landslides, earth quakes, mudslides and unreliable access to clean water.. What is more, the countrys mountainous areas not only challenging for agriculture, but also contributing to a regionalisation and division of the country as the mountain ranges separate east from west, and north from south. These regional complications became particularly pertinent during the 1992-97 Civil War where, according to the International Crisis Group (ICG), between 60,000 and 100,000 people died, approximately 600,000 were internally displaced and 80,000 left the country, including a significant amount of the Slav population. The ICG estimates the cost of the war to U.S. $7 billion, and in this way significantly slowing the countrys modest attempts for post-Soviet recovery. After the dissolution of the Soviet Union and the devastating Civil War, the country has experienced a significant decline in living standards through a rise in unemployment and poverty, and a deterioration of infrastructure, health care and education. Furthermore, the country lost its previously established export markets, sources of supplies and subsidies from Moscow (accounted to almost 40 percent of government revenue) (European Observatory on Health Care Systems, 2000). According to Trade and Investment Division (2001), ââ¬Å"Between 1991 and 1997, the level of GDP diminished by more than 60 percent which significantly reduced the living standards of the less protected part of the population.â⬠(p. 252). All these above mentioned factors urged Tajikistan to accumulate foreign debt, which reached $880 million US dollar by 1998. It is worth state that Tajikistan has comparative advantage in growing of cotton, which is considered as cash crop and main source of foreign exchange (World Bank Poverty Assessment Tajikistan Update). Namely the export of cotton coupled with aluminum helped the country to restore external balance. Although cotton is strategically important, the growing of that crop entails difficulties with extensive irrigation and profitability nowadays. FAO (2008) claimed cotton growers in Tajikistan were indebted about 100 million US dollars due to dramatic drop in prices for raw cotton in 2000. All these difficult situations have encouraged considerable labour emigration and a return to a more patriarchal society based on religious beliefs and old traditions as survival strategy when the traditional mans role as the main bread winner of the family is being challenged. Poverty and Migration Tajikistan was the poorest among the Soviet Union republics and nowadays, it remains the poorest country in Europe and Central Asia region. According to World Bank Poverty Assessment Tajikistan Update, Tajikistans mean per capita income by 1989 was less than half of that in Russia. Its national income per capita was less than 200 US dollars. After gaining of independence, figures were even deplorable; 81 percent of population lived under poverty line in 1999 (less than 2.15 US dollars per day at purchasing power parity). (Source TLSS 2003 and TLSS 2009). The unofficial unemployment rate was around 30%. After the end of civil war and some years of stability and peace Tajikistan experienced substantial improvements in poverty rates, which dropped to 64 percent in 2003. However, still, this is the highest rate of poverty when compared to that of poor countries in Commonwealth of Independent States, like Kyrgyzstan (54 percent in 2001) and Moldova (45 percent in 2002). (Source: Poverty A ssessments for respective countries.) Poverty rates in rural areas are higher than in urban areas. In 2003, the proportion of poor people was 65 percent in rural areas against 59 percent in urban. (World Bank Poverty Assessment Update). Provided that 73 percent of the population of Tajikistan lives in rural areas the poverty can be considered overwhelmingly rural. (World Bank Poverty Assessment Update). Given that Tajikistan has the youngest population structure of the former Soviet countries with 70 percent aged under 30, poverty is overwhelmingly among young and economically active part of the population. Lack of income means lack of opportunities: not only loss of access to food, health care and education, but also the loss of the ability to choose and control ones own life. Poverty destroys human capital and has an adverse impact on social relations, leading to violence and instability. (Saodat Olimova) Furthermore, in 2007, Tajikistan experienced the hard consequences of strong rise in international food and fuel prices; especially it is felt by people of Tajikistan. While the impact of the higher fuel and food prices and misguided market interventions of the government have been felt by everyone, many households in rural and mountainous areas seemingly are on the verge of destitution. While many vegetable prices have increased between 20-30% in the last 11 months, wheat flour has increased 81-131%, and cooking oils from 118-139%. All the while, real wages for unskilled laborers (which are too low to cover household costs to begin with) have increased by a mere of 20% (by 6% in KT). In short, wages are not keeping pace with the dramatic increases in food and fuel prices. Traditional lepeshka now cost 1 somoni of the 44.61 somoni an average teacher or nurse earns a month. Clearly, people have to find ways to survive and migration seems the only plausible way to do so. Thus, it is hard to improve ones living conditions in Tajikistan, and many find themselves forced to seek employment abroad. Furthermore comparatively improved economies of Russian Federation and other CIS countries create an appropriate environment for migration from Tajikistan. According to a year 2006 International Organization for Migration (IOM) survey on trafficking from Tajikistan, 96.9% of the approximately 1 million migrants from Tajikistan go to Russia in search of work. 1.4% of the migrants work in Kyrgyzstan, 0.7% in Kazakhstan, and another 0.7% in Ukraine. Also, according to an IOM report conducted amongst 2000 migrants in 2002, with follow-up amongst 4000 migrants in 2003, these migrants were 85% men and 15% women in 2002. Amongst men, the age groups 18-29, 30-39 and 40-49 all make up approximately one third of the migrant mass each. Olimova and Bosc divide these age groups into two, corresponding to the traditional life cycle in Tajikistan: ââ¬Å"sonsâ⬠of 18-29 years, and ââ¬Å"fathersâ⬠of 40-49 years. The first group migrates mainly to make money to establish his own family, whereas the second group goes abroad to be able to feed his family and organize the traditional ceremonies for his children. In average, 68.5% of the migrant s are married, and 22.6% live together as in marriage in Tajikistan, but without official registration. The last group consists mainly of youth between 15 and 19 years of age. Theoretical Background GREGORIAN, D. MELKONYAN, T. (January 2008) Microeconomic Implications of Remittances in an Overlapping Generations Model with Altruism and Self-Interest, IMF Working Paper, WP/08/19. This publication illustrates the dynamic strategic aspects of interaction between the migrant and remittance receiving relatives and shows the various microeconomic implications under each particular circumstance of interaction. Gregorian and Melkonyan analyse the plethora of motives for remit in terms of altruistic and self interest behavior of the remitter. In addition, they consider the scenario where two parties could work out self-enforcing contracts to implement choices that maximise their total surplus. They also discuss both the migration and the remittance patterns in Armenia with a particular focus on push and pull factors. The main part of the paper contended an empirical estimation of the microeconomic impact of migration and remittance in Armenia on hours supplied to the market, education spending, savings and borrowing behaviour from commercial banks. In the words of Gregorian and Melkonyan, ââ¬Å"this evidence [of the paper] suggests that the benefits of remittances might be overstated and emphasises the importance of measuring their impact in a general rather than a partial equilibrium contextâ⬠. In conclusion, the authors suggest that there is a need for either direct or indirect policy measures in shaping the remittance flows and their impact on the behaviour of remittance receiving households. This article inspired me to deepen my research of the dissertation topic in terms of analysis of not only the quantitative pattern of remittances but also the behavioral aspects of this phenomenon. That is, whether the remitter has altruistic or self-interest motives while sending money back home and what the possible outcomes are under each circumstance. I will also consider models and regression methods used in the paper to estimate possible impacts of remittance on labour supply, education spending and saving/borrowing behaviour in Tajikistan. Furthermore, the above paper put forward a vague, but at the same time, ambitious notion of potential policy measures that should be taken in order to promote remittance saving for the creation of small business and entrepreneurial activities in households, which I believe will be a crucial part of my dissertation. GIULIANO, P. RUIZ-ARRANZ, M. (March 2006) Remittances, Financial Development, and Growth, Journal of Development Economics, doi: 10.1016/j.jdeveco.2008.10.005 This paper examines the relationship between remittances and growth, and in particular the influence of local financial sector development on a countrys capacity to take advantage of remittances. Giuliano and Ruiz-Arranz underline the importance of remittances in promoting economic growth whilst looking specifically at the interaction between remittances and the financial sector. This publication is considered to be the first paper to provide evidence for both complementarity and substitutability between remittances and financial development in promoting economic growth. The authors make use of newly constructed data for remittances covering 100 developing countries and illustrate that remittances boost growth in countries with less developed financial systems by providing an alternative way to finance investment and helping to overcome liquidity constraint. They also suggest that there could be an investment channel through which remittances could promote growth especially when the financial sector does not meet the credit needs of the population, where remittances act as a substitute for financial services. I plan to make substantial use of the concept of interaction between remittances and the financial sector in growth in my dissertation, as the issue of leveraging and borrowing from banking systems by remittance-receiving households is central to my dissertation topic. In particular, I want to look at the possibility of commercial banks opening lines of credit for remittance-receiving households, based on the earning of the migrant. Additionally, I will consider this papers analysis of cyclical properties of remittances to assess whether they are procyclical and predominantly profit-driven or countercyclical. Accordingly, I aim to analyse the relationship of Tajikistan GDP and capital flows and see if they are correlated. PALEI, L.V. KOROBKOV, A.V. (2007) Migrant Remittances in the CIS: The Financial and the Socio-Economic Impact, Paper presented at the International Studies Association 48th annual meeting, Chicago, IL. This paper studies the current labour migration trends in the countries of the CIS and analyses the role of remittances as a means of socio-economic stabilisation in labour migrant source countries. It also provides the core causes of migration and its aspects in the context of a globalising world. Moreover, the authors examine how remittances could play an important role in the development of the country and what policies governments should adopt in order to better utilise the development potential of remittances. The paper is valuable as a source of background information on the causes and nature of migration processes in countries of the CIS. It also provides figures on the total number of migrants and remittances sent by them. Moreover, the authors identify remittances as one of the major stabilising factors of an economy and justify this by presenting statistics on remittances as a percentage of national GDPs. The important thing about this paper was that it focused very much on Tajikistan as one the major labour migration source countries. UNDP (2005) Central Asia Human Development Report, UNDP Regional Bureau for Europe and the Commonwealth of Independent States. This report studies the level of human development in Central Asian Republics. Throughout the report, the importance of increased regional cooperation in economic and other spheres of activities is repeatedly underlined. While mentioning some of the significant vulnerabilities of the region as being, for example, largely landlocked- the report also highlights the newly emerging opportunities availability of natural resource and being surrounded by fast developing countries. In conclusion, the report stresses the necessity to continue the process of reform in different sectors of economy. This report is a good source of so called country ââ¬Å"baseline dataâ⬠. It provided statistics on economic, demographic, social, and environmental aspects of a countrys development. Additionally, it looks specifically at the issue of labour migration and its economic, social, and cultural aspect. Being prepared by UNDP an organization, particularly active in Tajikistan- the report gains additional reliability and accuracy. AMUEDO-DORANTES, C. (2006) Remittances and Their Microeconomic Impacts: Evidence from Latin America, Journal of Proceedings, Federal Reserve Bank of Dallas, 187-197. Amuedo-Dorantes provides an overview of the remitting patterns of migrants, from Costa Rica, Dominican Republic, Haiti, Mexico, Nicaragua and Peru, working and residing in the United States. She summarizes the microeconomic impacts of remittances, particularly on spheres of employment, business ownership, education and health care investments. Furthermore she emphasises the importance of remittances as a resource for the accumulation of human capital investments in education and health and as a determinant of employment patterns in remittance-receiving households in developing economies. This publication gave me the idea concerning the appropriate categorisation of purposes of remitting into two broad groups; consumption, which consists of food/maintenance, purchase of a vehicle, recreation/entertainment expenses and debt payment; and asset accumulation/investment, which consists of construction, repair or purchase of a house, purchase of tools, livestock, agriculture inputs, start/expand of business, education and health expenses and savings. BORJAS, G.L. (1999) The Economic Analysis of Immigration, in the Handbook of Labor Economics, Vol 3a, 1698-1757. This particular paper investigates labour market affects of immigration in both the host and home country. Borjas emphasises the measuring of relative skills of immigrants and evaluation of implications of relative skill differentials on economic outcomes. The author focuses on different environments and premises where the human capital of the source country influences the labour market of the host country. That is, an analysis of the factors that determine the skills of immigrants; a discussion of the implications of the income-maximization hypothesis for the skill composition of the self-selected immigrant flow, an estimation of how the skills of immigrants compare to those of natives -both at the time of entry and over time as immigrants adapt to the host countrys labor market, an examination of the concept of economic adaptation with analysis of the relationship nature of an immigrants ââ¬Å"pre-existingâ⬠skills and the skills that the immigrant acquires in the host countr y, and finally, an evalution of the impact of immigration on the wage structure in the host country. This paper provides an important and basic understanding of the affect that immigration has on the economy of a host country. I will use the models and generalisations found in Borjas paper to analyse the migration pattern between Tajikistan and the Russian Federation. Furthermore I will use them for policy recommendation and measures in my dissertation. LEE-NAH, H. (2007) Outcome evaluation of HIV program in Tajikistan, Final report, Retrieved July 12, 2008 from http://www.undp.tj/files/ev/ev_report.pdf. The evaluation study outlined in the report was commissioned by UNDP, Tajikistan and is aimed at assessing the impact of two HIV related programs which were implemented in the country. These programs dealt with working on HIV prevention and mitigation in the following target groups: labour migrants and their families, prisoners, habitual drug users, sex workers, school youth, etc. The evaluation methods used included the thorough review of relevant documents and statistics, interviews, and site visits. The report provided an in depth analysis of the current situation with AIDS/HIV in Tajikistan and an indication of the success rate of the implemented programs, concluding with a set of recommendations on different levels of intervention and target groups. The report presented a very good source as a synthesized analysis of different documents and statistics available on HIV in Tajikistan. Specifically, it provided statistical data on the overall official number of people infected in the population (while also citing unofficial estimates), prevalence figures, and broke down the infected persons into different groups (including labour migrants). It also outlined the efforts which are being made to prevent the proliferation of HIV among labour migrants and recommendations to improve this process. The report, however, did not specifically feature any future projections of HIV infection spreading due to increasing number of labour migrants and their exposure to countries with much higher prevalence figures than those in Tajikistan. Remittances and Financial Sector in Tajikistan ââ¬Å"Migration from Tajikistan and the consequent remittances have been unprecedented in their magnitude and economic impact.â⬠IMF, Alexei Kiriyev, page 4-5 The measuring of remittances magnitude is still not definite:
Subscribe to:
Posts (Atom)